How to Build a Table Saw Stand
If you are a frequent user of table saw, then you should know how to build the table saw stand. Buying ready-made stands for the table can be fairly expensive and it depends on the type and brand; on the other hand, if you know how to build a table saw stand yourself, then you can save a good deal of money. So, let’s see how it is really done.
Procedure to Build Table Saw Stand
Initially cut four foot pieces and a 2×4 board frame. Cut two three feet- nine inch pieces for the other 2×4.Cut four three-foot pieces for the purpose of 4×4s legs.
Assembling
The frame for the stand is constructed by means of 4- 2×4 boards. The both four-foot pieces should be edged parallel to each other. The 3-foot 9-inch boards are inserted between the four foot pieces. Attach the frame with 2 ½ inch screws and both the ends are attached with the shorter ones.
Final Few Steps…
The square plywood should be aligned on the frame. 1 1/2-inch screws should be driven. The four legs should be attached against ach other and the screws are framed in to the legs. Place the table on the legs. The two 1 1/2-inch screws are driven down the corner for additional sturdiness. And, that’s it; you’ve just learnt how to build a table saw stand.